- Ford F-150 Foose Edition, 2008
The Ford truck team sat down with hot rod celebrity Chip Foose last year at the Specialty Equipment Marketing Association (SEMA) convention in Las Vegas - the heart of the red-hot $34 billion auto aftermarket industry - and issued a daunting challenge:
Less than five months later, Ford and Foose are revealing the low-slung, production-intent Ford F-150 Foose Edition show truck, a precursor to the truck that will bow in the fall of 2007 as the most powerful and fastest half-ton production truck on the planet.
But right at that table, the seven-time winner of "America's Most Beautiful Roadster Award" waved his wand - in his case a No. 2 pencil - and sketched out a conceptual offshoot of America's favorite pick-up that looked like a true boulevard cruiser with design elements that visually lower the truck.
Hot rod magic
It started where the Ford F-150 Foose Edition meets the road, the big 22-inch original wheels that fill the wheel wells with larger flares, causing the pickup to look lower. Foose also designed and fabricated a custom rocker panel that enhances the lowered look even though the truck was only slightly lowered.
Wide, bold racing stripes further accentuate the planted stance. They start at the leading edge of the hood, helping to flatten it out. The striping thins out, stretches down over the front fenders, and runs the length of the vehicle above the door handles and across the tailgate for a streamlined look from the side. Then it widens again at the tailgate for an exclamation mark.
The process was easier than it sounds, Foose says, because he had a great canvas - the Ford F-150 - to work with. It was also a labor of love. Chip Foose's personal primary ride is a souped-up 2005 Ford F-150 Lariat.
Ford engineers then took over by first creating computer renderings of Foose's sketches. "Chip sketches on paper; he doesn't like to use computers," says Karen Gietzen-Stewart, business strategy manager, Ford Advanced Product Creation.
The Ford truck team analyzed these renderings to ensure the Ford F-150's tough images was maintained. A concept truck was built and then, in early 2007, Foose flew to Detroit where he made final finishing adjustments to the design.
Foose touches are carried into the interior, with Chip Foose signature headrests and floor mats. A unique, leather-wrapped center console features a Foose-designed serialization plate with vehicle identification number (VIN) and build-sequence numbers mounted on the ashtray door.
To match its muscular look, the Ford F-150 Foose Edition is the most powerful and fastest half-ton truck on the market. The intercooled, supercharged Triton® V-8 pumps out 450 horsepower at 5,200 rpm and 500 pounds-foot of torque at 4,000 rpm.
Ford F-150 leads huge customization industry
The Ford F-150 was named the "most accessory friendly pick-up" by SEMA, the trade group that keeps tabs on the aftermarket - an industry that has grown eight to 10 percent the past 10 years. Customers also prefer the Ford F-150 for personalization as they currently spend nearly $1,700 each to customize it - more than double the rate in 2004 and more than any other competitive truck.
Ford's overall customization business grew 50 percent in 2006, far outpacing all other automakers, and is expected to double by 2008. This growth has been driven by full factory-customized vehicles - such as the Harley-Davidson™ and FX2 Sport F-150 model - versus individual parts sales.
The Ford F-150 already offers the most models and configurations - five series and 60 major variations - of any half-ton truck. Ford also continues its long-time truck heritage of building specialized models to appeal to the growing number of niche customers. Poore says the F-150 has led the trend of pickups going mainstream.
The 2008 Ford F-150 Foose Edition will begin life as an FX2 Sport model from the Kansas City Assembly Plant. The unique Foose elements will be customized at a modification center before being shipped to Ford dealers. The truck will go on sale by early 2008.
Foose's quick ascent
Ask his fellow auto designers and fans - from J Mays to Jay Leno - about Chip Foose's artistic style and you'll hear the words "clean" and "minimal styling" a lot.
But it was a chance meeting with famed Tucker and former Ford Motor Company designer Alex Tremulus that inspired Chip to attend the Art Center College of Design in Pasadena, California, from which he graduated with honors in 1990.
Working for several designers and fabricators in the 1990s, Foose was instrumental in designing and building signature street rods, customs, studio vehicles and show cars for such films as Blade Runner, Robo Cop and Gone in 60 Seconds.
In November 1990, Chip began his association with legendary customizer Boyd Coddington at Hot Rods by Boyd, where he was responsible for many internationally known vehicles, including Roadster, Sportstar, the Boydster I and II and Boyd Air.
In 1998, Chip left to form Foose Design with his wife, Lynne. His career includes numerous industry honors, including being the youngest member ever inducted into the Hot Rod Hall of Fame (at age 33) in 1997.
In 2002, Foose went mainstream when he was featured on the Discovery Channel's "Rides" documentary that aired repeatedly on The Learning Channel in early 2003. The show featured many of Chip's award-winning vehicles and allowed viewers to watch him conceptualize and re-design a 2002 Ford Thunderbird called "Speedbird" that debuted at the Specialty Equipment Market Association (SEMA) Show and received Ford's "Best of Show" award. Today, Chip and his Foose Design crew star in the popular series "Overhaulin'" that airs on The Learning Channel and has captured the imagination of not only automotive fans, but the general public, because of its humor and humanity. The premise is to "steal" a wreck from an unsuspecting owner and then return it as a completely tricked-out Dream Car.
Leaders of the trade
Ford F-Series trucks recently marked 30 years as the best selling truck in America and 25 years as the best selling vehicle in America. 2007 also marks the introduction of the new 2008 F-Series Super Duty with Ford's newest, most capable truck arriving at dealerships now.
Quick Specs
Powertrain
* 5.4-liter Triton V-8, intercooled and supercharged
* Iron block, aluminum cylinder heads
* 450 hp @ 5,200 rpm, 500 lbs.-ft of torque @ 4,000 rpm
* Four-speed automatic transmission
Chassis
* Wheelbase: 138.5 in.
* Length: 224.0 in.
* Height: 70.5 / 73.5
* Track (f/r): 67.0 / 67.0 in.
Suspension modifications
* Front tuning: Eibach coil springs, Sachs dampers, jounce bumper
* Rear tuning: Eibach leaf springs, Sachs dampers, jounce bumper
* Wheels/tires: 22-inch forged, polished Foose wheels and P275/45R22 Pirelli tires
Exterior modifications
* Ford Racing exhaust system
* Foose designed and fabricated wheel flares, lower side and front rocker moldings
* Unique front fender badges
* Foose-designed stripe package
* Foose-designed upper and lower grilles
Interior modifications
* Embroidered headrests with Chip Foose autograph
* "Foose" embroidered floormats
Less than five months later, Ford and Foose are revealing the low-slung, production-intent Ford F-150 Foose Edition show truck, a precursor to the truck that will bow in the fall of 2007 as the most powerful and fastest half-ton production truck on the planet.
But right at that table, the seven-time winner of "America's Most Beautiful Roadster Award" waved his wand - in his case a No. 2 pencil - and sketched out a conceptual offshoot of America's favorite pick-up that looked like a true boulevard cruiser with design elements that visually lower the truck.
Hot rod magic
It started where the Ford F-150 Foose Edition meets the road, the big 22-inch original wheels that fill the wheel wells with larger flares, causing the pickup to look lower. Foose also designed and fabricated a custom rocker panel that enhances the lowered look even though the truck was only slightly lowered.
Wide, bold racing stripes further accentuate the planted stance. They start at the leading edge of the hood, helping to flatten it out. The striping thins out, stretches down over the front fenders, and runs the length of the vehicle above the door handles and across the tailgate for a streamlined look from the side. Then it widens again at the tailgate for an exclamation mark.
The process was easier than it sounds, Foose says, because he had a great canvas - the Ford F-150 - to work with. It was also a labor of love. Chip Foose's personal primary ride is a souped-up 2005 Ford F-150 Lariat.
Ford engineers then took over by first creating computer renderings of Foose's sketches. "Chip sketches on paper; he doesn't like to use computers," says Karen Gietzen-Stewart, business strategy manager, Ford Advanced Product Creation.
The Ford truck team analyzed these renderings to ensure the Ford F-150's tough images was maintained. A concept truck was built and then, in early 2007, Foose flew to Detroit where he made final finishing adjustments to the design.
Foose touches are carried into the interior, with Chip Foose signature headrests and floor mats. A unique, leather-wrapped center console features a Foose-designed serialization plate with vehicle identification number (VIN) and build-sequence numbers mounted on the ashtray door.
To match its muscular look, the Ford F-150 Foose Edition is the most powerful and fastest half-ton truck on the market. The intercooled, supercharged Triton® V-8 pumps out 450 horsepower at 5,200 rpm and 500 pounds-foot of torque at 4,000 rpm.
Ford F-150 leads huge customization industry
The Ford F-150 was named the "most accessory friendly pick-up" by SEMA, the trade group that keeps tabs on the aftermarket - an industry that has grown eight to 10 percent the past 10 years. Customers also prefer the Ford F-150 for personalization as they currently spend nearly $1,700 each to customize it - more than double the rate in 2004 and more than any other competitive truck.
Ford's overall customization business grew 50 percent in 2006, far outpacing all other automakers, and is expected to double by 2008. This growth has been driven by full factory-customized vehicles - such as the Harley-Davidson™ and FX2 Sport F-150 model - versus individual parts sales.
The Ford F-150 already offers the most models and configurations - five series and 60 major variations - of any half-ton truck. Ford also continues its long-time truck heritage of building specialized models to appeal to the growing number of niche customers. Poore says the F-150 has led the trend of pickups going mainstream.
The 2008 Ford F-150 Foose Edition will begin life as an FX2 Sport model from the Kansas City Assembly Plant. The unique Foose elements will be customized at a modification center before being shipped to Ford dealers. The truck will go on sale by early 2008.
Foose's quick ascent
Ask his fellow auto designers and fans - from J Mays to Jay Leno - about Chip Foose's artistic style and you'll hear the words "clean" and "minimal styling" a lot.
But it was a chance meeting with famed Tucker and former Ford Motor Company designer Alex Tremulus that inspired Chip to attend the Art Center College of Design in Pasadena, California, from which he graduated with honors in 1990.
Working for several designers and fabricators in the 1990s, Foose was instrumental in designing and building signature street rods, customs, studio vehicles and show cars for such films as Blade Runner, Robo Cop and Gone in 60 Seconds.
In November 1990, Chip began his association with legendary customizer Boyd Coddington at Hot Rods by Boyd, where he was responsible for many internationally known vehicles, including Roadster, Sportstar, the Boydster I and II and Boyd Air.
In 1998, Chip left to form Foose Design with his wife, Lynne. His career includes numerous industry honors, including being the youngest member ever inducted into the Hot Rod Hall of Fame (at age 33) in 1997.
In 2002, Foose went mainstream when he was featured on the Discovery Channel's "Rides" documentary that aired repeatedly on The Learning Channel in early 2003. The show featured many of Chip's award-winning vehicles and allowed viewers to watch him conceptualize and re-design a 2002 Ford Thunderbird called "Speedbird" that debuted at the Specialty Equipment Market Association (SEMA) Show and received Ford's "Best of Show" award. Today, Chip and his Foose Design crew star in the popular series "Overhaulin'" that airs on The Learning Channel and has captured the imagination of not only automotive fans, but the general public, because of its humor and humanity. The premise is to "steal" a wreck from an unsuspecting owner and then return it as a completely tricked-out Dream Car.
Leaders of the trade
Ford F-Series trucks recently marked 30 years as the best selling truck in America and 25 years as the best selling vehicle in America. 2007 also marks the introduction of the new 2008 F-Series Super Duty with Ford's newest, most capable truck arriving at dealerships now.
Quick Specs
Powertrain
* 5.4-liter Triton V-8, intercooled and supercharged
* Iron block, aluminum cylinder heads
* 450 hp @ 5,200 rpm, 500 lbs.-ft of torque @ 4,000 rpm
* Four-speed automatic transmission
Chassis
* Wheelbase: 138.5 in.
* Length: 224.0 in.
* Height: 70.5 / 73.5
* Track (f/r): 67.0 / 67.0 in.
Suspension modifications
* Front tuning: Eibach coil springs, Sachs dampers, jounce bumper
* Rear tuning: Eibach leaf springs, Sachs dampers, jounce bumper
* Wheels/tires: 22-inch forged, polished Foose wheels and P275/45R22 Pirelli tires
Exterior modifications
* Ford Racing exhaust system
* Foose designed and fabricated wheel flares, lower side and front rocker moldings
* Unique front fender badges
* Foose-designed stripe package
* Foose-designed upper and lower grilles
Interior modifications
* Embroidered headrests with Chip Foose autograph
* "Foose" embroidered floormats
0 comments:
Post a Comment