Venturi Fetish, 2005

 

Venturi Fetish, 2005

The Venturi Fétish is the world's first production 2-seater electric sports car. It is produced by Venturi in Monaco.

Technical specifications
The car is unique in that its acceleration is comparable to a normal internal combustion engined sports car, producing as it does 300 horsepower (180 kW), with a 0-100 km/h (0-60 mph) time of 4.5 seconds. 

Its top speed is less comparable however, at 170 km/h (105 mph), which is respectable considering that it only has one gear. It runs at a constant translation of 9.58 : 1, with a torque of 220 Nm.

The other particular attraction of the car is that due to the electric motor, the full 300 bhp is available at all speeds, as opposed to the progressive delivery of a internal combustion engined car, where full power is only available within certain RPM ranges.

The company specifies the car with a range of 250 to 350 km (155 to 217 miles), which is perhaps the best one can get with an electric car. The batteries are all lithium ion accumulators, which recharge in about 16.5 hours at 16 amperes, or at 3.5 hours at 80 amperes.

Miscellaneous information

•     * All the car's electric drivetrain components are designed and made by AC Propulsion.
•     * The retail price for this car is € 450,000 (approx. US$575,000), VAT not included.
•     * The futuristic design of the car was done by the parisian designer Sacha Lakic.

Vauxhall Corsa 3-door, 2007

 

• Vauxhall Corsa 3-door, 2007

A new version of the Gamma platform has been codeveloped by Fiat and Opel. 

It will be used by the 2006 Fiat Grande Punto (a stretched version of the Fiat Punto), 2007 Opel Corsa and future versions of Lancia Ypsilon and Fiat Idea. 

GM Daewoo take responsibility for future development of the Gamma platform, so the production of the future Corsa might be outsourced to South Korea as well. 

The first official pictures of the 2007 Corsa were released by Opel in May 2006. Based on the photos of the Corsa, it's very likely that the 3-door and 5-door versions will remain. The car will also be sold as a Vauxhall in the UK.

Volkswagen New Beetle Ragster Concept, 2005

 

 

 

 

 

Volkswagen New Beetle Ragster Concept, 2005

It's supposed to be a preview of the future design of the New Beetle. The base of the Ragster (a ragster is the cross between a ragtop and a speedster) was a regular New Beetle Convertible. 

 

It made some changes, such as chopping the top, penning a new U-shaped roof, and creating a unique paint job with silver double stripes. 

The interior differs from the original New Beetle, being a 2+2 and having distinctive control dials. Another item of interest is that the Ragster's rear-view mirror is mounted on its dashboard (a retro feature, reminiscent of the first Type 1s). The Ragster's profile is lower than that of the prior New Beetle.

Lotus Evora Type 124 Endurance Racecar, 2010

 

• Lotus Evora Type 124 Endurance Racecar, 2010

The Lotus Evora Type 124 Endurance Racecar has been developed from the award-winning Lotus Evora road car and is built to FIA regulations and safety standards.

The Lotus Evora Type 124 Endurance Racecar is the next step in the evolution of the Evora. The car will make its 24 hour racing debut at the ADAC Nürburgring 24 Hours which provides a great test for the Evora's performance, efficiency and durability under tough and demanding endurance race conditions.

At the heart of the Lotus Evora are fundamental racecar elements: mid-engine layout, high-tech and super-stiff extruded and bonded aluminium chassis and very strong lightweight forged aluminium wishbones. All these elements mean that it is a natural evolution from the road going Lotus Evora to a competitive endurance racecar.

From the outset the design team had intentions to take the Evora racing and the chassis was designed with this in mind. Endurance races are the perfect events to showcase the efficiency, handling and durability characteristics that have been fundamental to the concept of the Evora.

The Lotus Evora Type 124 Endurance Racecar has a race-tuned version of the mid-mounted Toyota V6 engine, with power increased to over 400 ps (depending on race regulations). Vehicle mass is expected to be reduced by up to 200 kg, bringing the weight of the racecar to less than 1200 kg (depending on race regulations).

Further changes for the Lotus Evora Type 124 Endurance Racecar include a six speed sequential paddle shift racing gearbox, full FIA specification roll cage, FIA-compliant 120 litre ATL fuel system, FIA fire extinguisher system, competition carbon fibre rear wing, diffuser and front splitter.

The racecar is fitted with AP Racing 6 piston callipers front and rear, with a race-tuned Bosch ABS system, 4-way adjustable dampers and adjustable anti-roll bars. The racecar runs on 18" rims shod with Pirelli racing slicks and the wheels widths have been increased over the roadcar to 9 ½ J on the front and 11 J on the rear.

The aerodynamically efficient Lotus Evora Type 124 Endurance Racecar body design, made from lightweight composite and carbon fibre panels, remains predominantly unchanged from the road car, with the only modifications being to the lower sections of the front and rear clamshells and the side sills.

The racecar is expected to compete in a number of endurance races in 2010/2011 forming part of a factory-supported race program. The races that are targeted are: The 2010 ADAC Nürburgring 24 Hours (Nürburgring Nordschleife, Germany) in May 2010, Merdeka Millennium 12 Hours (Sepang, Malaysia) in August 2010, BritCar 24 Hours (Silverstone, UK) in October 2010 and the Dubai 24 Hours (Dubai Autodrome, UAE) January 2011.

Chevrolet Cruze WTCC, 2009

• Chevrolet Cruze WTCC, 2009

The Chevrolet Europe has shown the first glimpse of the marque's 2009 World Touring Car Championship contender. The all-new Chevrolet Cruze, which premiered at the Paris Motor Show, will continue Chevrolet's presence in the WTCC, in which the marque so far has won twelve world championship races.

Testing of the new Chevrolet Cruze WTCC race car - which is the first to start Chevrolet's new design language in Europe - has already started and is on schedule. 

Developed, built, run and driven by the same team and drivers, the Cruze will be all but guaranteed the same speed, reliability and success. 

The Chevrolet Cruze WTCC first competitive outing in Brazil at the opening round of the 2009 WTCC in Curitiba. In 2009, the WTCC  again visit twelve tracks, in South and Central-America, Africa, Europe and the Far-East.

Lancia Delta 1.8 Di Turbo Jet, 2009

 

 

 

 

 Lancia Delta 1.8 Di Turbo Jet, 2009

Lancia Delta reflects perfectly the concept of "Anticrisis Luxury" as it fulfils the current requirements of prestige and mobility thanks to the logic of downsizing - i.e. it ensures high quality and performance, reducing cost, size and fuel consumption. Thanks to these winning characteristics, in March this model became the leader of its car range in Italy and is fast growing at European level.

The innovations of the 2009 range
The main innovation is represented by the 200 HP 1.8 Di TurboJet engine, the most powerful one of its range. It is an innovative petrol direct injection engine that confirms Lancia's preference for sports cars and, at the same time, its commitment to protect the environment by limiting emissions and fuel consumption.

The qualities are achieved by enhancing its brilliance, flexibility and the pleasure of driving which have always made this model stand out. This engine is produced by FPT - Fiat Powertrain Technologies - and is provided with a modern 6 speed automatic transmission. It delivers a maximum power of 200 HP (147 kw) at 5,000 rpm and a maximum torque of 320 Nm (32.6 Kgm) at 1,400 rpm. With such equipment, Lancia Delta can reach a maximum speed of 230 km/h and goes from 0 to 100 km/h in only 7.4 seconds. At the same time, the car stands out for low fuel consumption (7.8 litres per 100 km), reduced CO2 emissions (185 g/km) and a Euro 5 homologation.

The second innovation is the exclusive Executive version: a car addressed to clients who look for top luxury and comfort. The "top range" was designed to fulfil the requirements of business clients and members of the diplomatic and institutional worlds - as the attention invested in designing a comfortable passenger compartment shows. Seats are wrap around and comfortable as they are designed to business class standards. The back seats are comfortable for long trips with plenty of room for the legs. Therefore, Lancia Delta Executive offers a real, modern, in tune with the time alternative to bigger, heavier and more expensive cars. The fact this car was chosen to be the Official Car for the 9th World Summit of the Nobel Peace Prize held from 11th to 13th December 2008 in Paris - of which Lancia was the Main Sponsor - is not a coincidence. A Lancia Delta Executive fleet will also drive the international authorities to the G8 summit that will take place from the 8th to the 10th of July.

All these technological innovations - together with the self-adaptive bi-xenon headlights (Adaptive Xenon Light) and the integrated satellite navigator (Instant Nav) - were made thanks to the cooperation between the Brand and Magneti Marelli. We cannot forget that the cooperation between Fiat Group Automobiles, Magneti Marelli and Microsoft has given birth to Blue&Me, a system complete with Telecom service functions - which Lancia Delta is the first one to offer - together with hands free, music player and navigation functions.

Film stars choose Lancia Delta
Lancia Delta was engaged for the Columbia Sony Pictures "Angels and Demons" new film kolossal. This film, inspired by Dan Brown's bestseller of the same title, is on the same line of the "The Da Vinci Code" and is also directed by Ron Howard, with Tom Hanks in the role of professor Langdon. Lancia celebrates this important product placement with a Lancia Delta Special Series that enhances the double soul of this model: an angel in terms of carbon emission and a devil in terms of performances. The proof is in the two engines available for this version, the 200 HP 1.8 Di TurboJet and the 190 HP 1.9 TwinTurbo, which ensure a better CO2/HP ratio for this range - i.e. maximum power for minimum emissions. The same winning features can be found in the other two models that make up the "Première Collection": 105 HP Ypsilon 1.3 Multijet and 95 HP Musa 1.3 Multijet.

For the movie launch of "Angel and Demons" scheduled for the 15th May 2009, Lancia has decided to launch an original communication campaign that goes under the slogan "One angel, 200 demons". Actions, performance and temperament: these three concepts dominate the commercial that, thanks to an agreement with Sony Pictures, exclusively shows some of the film shots of which the new 200 HP Lancia Delta 1.8 Di TurboJet is the protagonist. The press campaign is as sensational as the film as it combines one of the most emblematic film shots with a double image of the new Lancia Delta which clearly refers to its double soul: angelic on the outside, but with 200 demons inside.

The Lancia Delta is increasingly the car chosen by stars. Since last year, this model has been the Official Car of the most prestigious film festivals sponsored by Brand: following its launch at the 65th Venice Film Festival, a fleet of Lancia Delta cars drove cinema stars to the red carpets in Rome, Milan and Turin.

The strengths of the new engine
The entire world acknowledges the fact that the Italian motoring school has always had the ability to produce gritty and temperamental engines, true "jewels" that are the result of the experience and passion of the engineers matched with their technical competencies acquired over years. The new 200 HP 1.8 Di TurboJet (Euro 5) is no exception.

The new engine is produced by FPT - Fiat Powertrain Technologies - and has a maximum power of 200 HP (147 kw) at 5,000 rpm and a maximum drive torque of 320 Nm (32.6 Kgm) at 1,400 rpm. Thanks to its combination with a 6 gear automatic/sequential transmission, the 200 HP 1.8 Di TurboJet provides an exciting and unmatchable drive: it can reach a maximum speed of 230 km/h and accelerate from 0 to 100 km/h in 7.4 seconds. In spite of these amazing performances, fuel consumption and emissions are surprisingly low: respectively 7.8 l/100km in the combined cycle and 185 g/km of CO2.

Thus, these innovative engines prove Lancia Automobiles' commitment to protecting the environment by containing emissions as well as reducing fuel consumption. All this is achieved by enhancing brilliance, flexibility and the pleasure of driving which have always made this model stand out. In order to achieve these extraordinary results, the 200 HP 1.8 Di TurboJet introduces petrol direct injection, turbocharging and an exhaust and intake double continuous phase transformer. The merging of these different technological solutions offers important advantages to clients such as the direct injection which means low fuel consumption for high engine performance. Furthermore, the turbocharger associated with the double phase transformer enables quick acceleration thanks to a particularly favourable drive torque curve.

Here are the details of all the innovations of the new 200 HP 1.8 Di TurboJet which was designed and developed by engineers of FPT - Fiat Powertrain Technologies, the sector of Fiat Group that provides innovation, design, plan and production activities for engines and gearboxes of all uses: from cars to industrial vehicles, from boats to agricultural machines. With about 20,000 employees, 16 plants and 11 research centres located in 9 different countries, this Sector represents a most significant presence in the field of engines at world level. In FPT, about 3,000 highly specialized engineers work on innovation technologies development and automation. The over 40 patents registered every year show quality and reliability of this group, making FPT - Fiat Powertrain Technologies - a great centre of technological excellence and constant innovation.

The Scavenging Technology
The amazing performances of this engine are a result of the application of the Scavenging technology which maximizes the drive torque at very low rpm by guaranteeing an incredible engine response speed to any driver request.

Direct injection
The direct injection reduces the temperatures in the combustion chambers through the evaporation of fuel and lowers the knock sensitivity. This enables the engine to achieve great performances even for a moderately high compression ratio (equal to 9.5) and ensures limited fuel consumption at a "partial" speed.
The direct injection system is essential in reducing emissions thanks to an advanced strategy of double injection. Furthermore, thanks to the direct control of fuel, it is possible to avoid some of the petrol getting directly to the exhaust manifold during the scavenging with negative effects on the catalytic converter's functionality. Lastly, this injection system of second generation is provided with a new high pressure pump (capable of managing petrol pressure of 150 bar) and innovative injectors with 7 holes that guarantee ideal evaporation for all operating conditions.

Double phase transformer
The two continuous phase transformers on the intake and exhaust camshafts enable phase optimisation at any speed and engine load by reducing fuel consumption and emissions as much as possible. Moreover, by combining the two transformers with the turbocharger, it is possible to manage the Scavenging strategy by defining the correct overlapping during the transitory phases. In this way it is possible to respond to a sudden driver request by maximising the engine's response speed at low rpm.

Turbo
This engine is provided with a new generation turbocharger connected to an innovative "Pulse Converter"-type exhaust manifold which optimises the use of exhaust pressure waves to increment the driving torque at low speeds. Both manifold and turbine are made of microcast steel so that they can reach very high working temperatures (up to a maximum of 1020 °C). This is very important for reducing consumption while operating at medium/high speed - i.e. on a motorway.

Thermal Fluid Dynamics
The intake ducts were designed and optimised by using mono and three-dimensional calculation technologies through which it was possible to obtain a correct and high turbulence level. Even the combustion chamber was optimised by using wide squish areas and by minimising area/volume ratios with clear benefits in terms of combustion efficiency. Lastly, the exhaust ducts were designed to work in tune with the exhaust manifold and maximise its pulse converter effect.

The Emissions
One of the main priorities of FTP - Fiat Powertrain Technologies - engineers was to guarantee a low level of emissions together with excellent performances, in line with the Lancia Automobiles' philosophy which places the protection of the environment at the core of its products' design and improvement. Just like the Lancia Delta diesel engines (the 190 HP 1.9 Twin Turbo MultiJet, 120 HP 1.6 MultiJet and 165 HP 2.0 MultiJet), the brand new 1.8 Di Turbo Jet 200HP E5 was Euro 5 approved even before the standard enforcement date.

Subaru Forester, 2008

 

 

 

Subaru Forester, 2008

The new Forester has realized ideal proportions that provide ample interior space and offer improved utility without substantially enlarging the body size.

Compared to the previous model, the new Forester is 110 mm taller (excluding the roof rail) and 45 mm wider, and its wheelbase has been expanded by 90 mm, increasing interior space and improving riding comfort. On the other hand, the overall distance between the ends of the right and left door mirrors has been shortened by 10 mm through mirror position and design changes. Also, the minimum turning radius was made shorter by 0.1 meter for zippy handling.

Off-road capability is further improved by optimization of approach and departure angles, coupled with a generous 225-mm ground clearance.

The double-wishbone rear suspension makes room for a deeper and wider luggage compartment. This enhances the utility of this car that already features cargo area tie-down hooks and a DC12V/120W power outlet, as well as a push button switch for folding down the rear seatbacks.

Larger door openings, which are enabled through new sash construction, afford improved ingress and egress, and the rear doors open 75 degrees to allow for better rear seat access.

Through the enhancement of body rigidity, less road noise reaches the interior of the car. All door openings are sealed with double-layered weather stripping placed along the door trim for the optimal pressure to tightly seal the doors and ensure a quieter ride.
The multi-functional center console provides a spacious compartment that can accommodate an A4-size notebook PC and a purse of equivalent size. It also incorporates a removable tray that can be used to hold portable media players and cell phones. The console compartment has a sliding lid that is cushioned on top to serve as an armrest.

A retractable rear tray with a cup holder is installed between the rear seats, further elevating rear passenger comfort. (Available on the 2.0XS and 2.0XT)

The Exterior design
Streamlined, yet sculpted styling evokes images of powerful, well defined muscles carved out of stone.
Sharply defined character lines running from the sides of headlights to the tail lights, combined with boxed front fenders and projected rear quarter panels, accentuate a more pronounced SUV profile.

The center of the redesigned front grill is metallic gray in color, making a sharp yet elegant contrast to its chrome-plated contours.
Headlamps are chrome-plated on the inside to project the light outward evenly. Rear lights are clustered and designed to highlight a luminous and translucent look in the rear styling.

17-inch aluminum-alloy wheels with distinctively sculptured spokes emphasize the vehicle's commanding presence and high quality. 16-inch aluminum-alloy wheels also feature sharp lines of spokes, expressing high quality and smartness.

Eight exterior colors are available.

The interior design
Decorative insets with a brushed aluminum-look flow from the center panel of the dashboard to the door trim, adding spaciousness and airiness in the interior and stressing sportiness in the cockpit. Rich and refined interior design is accentuated by the center panel, which combines wood and metal finishes, as well as by the door trim, embellished with metal-finish panels for window and door switches.

The vehicle information display, which constantly shows outside temperature, average mileage and time on the digital clock, as well as a navigation screen and audio display, are placed nearer the top of the dashboard for improved visibility and functionality.

The front seat cushions employ highly resilient urethane materials that effectively absorb vibration during a drive. In addition, newly developed seatback springs firmly support the driver's hips and back to maintain the optimal driving position.

Drivetrain
An expanded ground clearance further improves the off-road capability of the vehicle. The raising of the clearance does not alter the low center of gravity that is attained by mounting the engine low in the vehicle, thereby securing outstanding vehicle stability.

4-speed AT models are equipped with the Sportshift gear selection. By optimizing the final gear ratio and torque convertor characteristics, as well as through reducing friction among part assemblies, driving performance and fuel economy has been improved. The N Control System on AT models automatically shifts the transmission back to neutral from driving positions after the brake pedal is depressed for some time. Gear shift operation has also been enhanced by the redesigned shift lever positions and the use of roller bearings.

The SI-Dive (Subaru Intelligent Drive) system on the 2.0XT model offers three different modes of driving for the driver to enjoy: Intelligent; Sport; and Sport Sharp.

Gear ratios on MT models, from the second through the five-speed, as well as the final drive gear ratio, have been modified to improve driving performance and fuel economy. Reducing friction inside the transmission also contributes to better gear shift operation on MT models.

The Active Torque Split AWD system is mounted on AT models. MT models come with the center differential AWD system with viscous LSD (limited slip differential). Both AWD systems distribute optimal power to the wheels with the firm grip and traction, providing unrivalled vehicle stability.

The Vehicle Dynamics Control (VDC) is standards on all models. Fed by information gathered by sensors that monitor vehicle and road conditions, the VDC coordinates the engine, transmission, and brakes in order to recover the vehicle's position should unstable movements occur on a slippery road.

2.0-L DOHC engines on the 2.0X and 2.0XS
Fuel economy has been improved with the redesigned DOHC cylinder head, as well as through optimization of the compression ratio and reduction of the volume of the combustion chamber.

Low-end and mid-range torque is improved, while better fuel economy and lower gas emissions are achieved, primarily through design changes in the engine that generate a stronger tumble gas flow and raise gas intake efficiency.
The use of AVCS contributes to higher power output, while fuel economy is also achieved by improving combustion efficiency through the optimized timing of valve openings and closings.

A design change in the cooling water channel around the spark plug further prevents engine knocking and also helps improve low-end and mid-range torque output.
With the optimization of the diameter and length of the intake manifold, and the adoption of the equal length/constant pulsation independent exhaust system, the engine's intake and exhaust performance has been elevated.

Two catalytic convertors have been placed in tandem. The layout enables the convertors to quickly heat up, which facilitates catalytic activation during engine startup and improves on emission reduction efficiency.

The twin mufflers expand the muffler capacity, bringing noise levels down even lower and reducing exhaust back pressure.

2.0-L DOHC Turbo engine
A newly developed DOHC cylinder head is used in this engine. The intake port and the combustion chamber have been redesigned to reduce residual gasses, thus raising combustion efficiency.

By using a resin-based intake manifold, the inner walls of the manifold are smooth and less resistant to the intake flow. The weight is also reduced by 30% compared to the earlier manifold.
A design change in the cooling water channel around the spark plug further prevents engine knocking and also helps improve low-end and mid-range torque output.

The injector nozzle has been redesigned to atomize fuel and finely disperse it into the combustion chamber for improved combustion. This also helps reduce harmful substances in emissions.

Adopted is a secondary air system that forces air into the exhaust port to burn out any gasoline remaining in it. The system helps eliminate harmful substances when the powertrain is still cool, and it promotes early activation of catalytic converters.

The twin mufflers expand the muffler capacity, bringing noise levels down even lower and reducing exhaust back pressure.

Powered by regular gasoline, the 2.0-L naturally aspirated Boxer engine features better combustion efficiency, as well as eco-friendly performance and fuel economy, thanks to a newly designed DOHC cylinder head and the use of the active valve control system (AVCS).

Skoda Octavia RS, 2010

• Skoda Octavia RS, 2010

The facelifted Skoda Octavia RS has a redesigned front mask with an RS logo and bold headlamps that, can be fitted with xenon units combined with an adaptive front lighting module.
 

Besides a wider and bolder induction aperture, the car's innovated bumper boasts a further two innovations: fog lamps with the Corner function and LED lamps for daytime lighting. The covers of integrated tailgate lamps have been redesigned to look more attractive, other innovations include, for example, a new metallic paint (Anthracite) and 18" Neptune wheels.
 

The sports-tuned chassis has been lowered to 127 mm, the car's weight reduced by 20 kg in the petrol version and 15 kg in the diesel one.
Significantly reduced air resistance has a positive impact upon the car's overall performance.
 

The maximum speed is higher, and the car's responsiveness and acceleration have also been improved.

Vauxhall Antara, 2007

 

• Vauxhall Antara, 2007

The Opel Antara is a mid-size crossover SUV, which is based on General Motors' Theta platform. It is closely related to the Chevrolet Captiva (made in Korea by GM Daewoo, also sold as the Daewoo Winstorm), and shares the engine lineup with it, but has a different exterior and interior, as well as different exterior dimensions. 

The Antara is scheduled to be launched towards the end of 2006. In the UK, the model will be sold as Vauxhall Antara.

The Engines

* 2.0 L turbodiesel I4, 150 hp (112 kW) (developed with VM Motori) - 5-speed manual
* 2.4 L Ecotec I4, 142 hp (106 kW) (from Holden) - 5-speed manual
* 3.2 L Alloytec V6, 225 hp (168 kW) (from Holden) - ActiveSelect automatic

Toyota FT-86 Concept, 2009

 

 

 

• Toyota FT-86 Concept, 2009

The Toyota FT-86 Concept is 4,160mm long, 1,760mm wide, and 1,260mm high with a wheelbase of 2,570mm, giving it a compact feeling that is easy for the driver to handle while able to accommodate four occupants. In addition to being light and having a low center of gravity, the Toyota FT-86 Concept boasts the handling of a racing car as well as a 6-speed manual transmission and ADVICS brakes.

The stylish concept captures the heart with the "functional utility" of its highly-refined body. It is the creation of Toyota Europe Design Development known as ED2, which has established body lines that take into consideration a low center of gravity and aerodynamics. The interior is distinctive, featuring an instrument panel with a gray and white base, gauges with red neon lights and digital displays, and a navigation system. In addition, a zipper that evokes an image of interior lapping with minimal covering of a highly-refined body presents a striking display.

It's necessary to create a vehicle in which the driver plays the main role in order to have as many people as possible experience the joy of driving.

The Toyota FT-86 Concept is neither an electric vehicle nor a hybrid vehicle, but is a sports model with a gasoline engine developed to convey the essential appeal of automobiles in a new era. It is a must-see concept car that expresses TMC's desire to once again create a Toyota sports car.

The Small FR Sports Concept Vehicle that Combines Environmental Performance and the Joy of Driving

TMC seeks to develop the ultimate earth-conscious environmentally-considerate vehicle with a focus on hybrid technologies without losing sight of the appeal of cars themselves or the joy of driving.

Over the past several years, the need has been rising for motor vehicles that take into consideration global warming and other environmental issues, while there has also been concern that there have been too few new sports cars that make the heart beat faster and that the time is right for a new generation of sports cars. In response to these needs, TMC has developed the Toyota FT-86 Concept, a sports car equipped with a 2,000cc, horizontally opposed, four-cylinder, naturally-aspirated gasoline engine that evokes the joy of driving a car and the pleasure of vehicle ownership.

As the name "Future Toyota 86 Concept" implies, the Toyota FT-86 Concept, which  exhibited at the 2009 Tokyo Motor Show, is a new 86 Toyota with a flash red finish. It is a compact, rear-wheel drive sports concept car that embodies speed and the excitement of driving that give cars their appeal as well as environmental performance.