Oldsmobile Aerotech Concept, 1988
Oldsmobile Aerotech Concept, 1988
Monday, December 27, 2010
Mini Cooper S, 1968
Mini Cooper S, 1968
The Mini is a small car that was produced by the British Motor Corporation (BMC) and its successors from 1959 to 2000. The most popular British-made car, it has since been replaced by the New MINI which was launched in 2001. The original is considered an icon of the 1960s, and its space-saving front-wheel-drive layout influenced a generation of car-makers. In the international poll for the award of the world's most influential car of the twentieth century the Mini came second after the Ford Model T.
The revolutionary and distinctive two-door car was designed for BMC by Sir Alec Issigonis (1906–88). It was manufactured at the Longbridge and Cowley plants in the United Kingdom, and later in Australia, Belgium, Chile, Italy, Portugal, South Africa, Spain, Uruguay, Venezuela and Yugoslavia. The Mini Mk I had three major updates: The Mk II, the Clubman, and the Mk III, within which were a series of variations including an estate car, a pickup truck, a van, and the Mini Moke — a jeep-like buggy. The Mini Cooper and Cooper "S" were sportier versions that were successful as rally cars — winning the Monte Carlo Rally three times.
Design and development
Designed as project ADO15 (Austin Drawing Office project number 15), the Mini came about because of a fuel crisis. In 1956 as a result of the Suez Crisis, which reduced oil supplies, the United Kingdom saw the re-introduction of petrol rationing. Sales of large cars slumped, and there was a boom in the market for so called bubble cars, which were mainly German in origin. Leonard Lord, the somewhat autocratic head of BMC, decreed that something had to be done and quickly. He laid down some basic design requirements: the car should be contained within a box that measured 10 × 4 × 4 feet (3 × 1.2 × 1.2 m); and the passenger accommodation should occupy six feet (1.8 m) of the 10 foot (3 m) length; and the engine, for reasons of cost, should be an existing unit. Issigonis, who had been working for Alvis, had been recruited back to BMC in 1955 and, with his skills in designing small cars, was a natural for the task. The team that designed the Mini was remarkably small; as well as Issigonis, there was Jack Daniels, who had worked with him on the Morris Minor, Chris Kingham, who had been with him at Alvis, two engineering students and four draughtsmen. Together, by October 1957 they had designed and built the original prototype, which was affectionately named 'The Orange Box' because of its colour.
The ADO15 used a conventional BMC A-Series four-cylinder water-cooled engine, but departed from tradition by having it mounted transversely, placing the engine oil lubricated, four-speed transmission in the sump, and by employing front-wheel drive. Almost all small front-wheel-drive cars developed since the 1970s have used a similar configuration. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so it blew air into the natural low pressure area under the front wing. This location saved precious vehicle length, but had the disadvantage of feeding the radiator with air that had been heated by passing over the engine.
The suspension system, designed by Alex Moulton at Moulton Developments Limited, used compact rubber cones instead of conventional springs — this led to a rather raw and bumpy ride, but this rigidity, together with the wheels being pushed out to the corners of the car, gave the car its famous go kart-like handling. It was initially planned to use an interconnected fluid system, similar to the one which Issigonis and Moulton were working on in the mid-1950s at Alvis, but the short development time of the car meant this would not be ready in time for the launch. The system intended for the Mini was further developed to become the hydrolastic system and was first used on the Austin 1100 (launched in 1962). Ten-inch wheels were specified, so new tyres needed to be developed — with the initial contract going to Dunlop.
The car was designed with sliding windows in the doors, thus allowing for storage pockets to be fitted in the space where a winding window mechanism would have been. Issigonis is said to have sized the resulting storage bins to take a bottle of his favourite Gordon's Gin. The boot lid was designed with the hinges at the bottom so that the car could be driven with it open to increase luggage space. On early cars the number plate was hinged so it dropped down to remain visible when the boot lid was open.
To keep manual labour costs low, the car was designed with quirky welded seams that are visible on the outside of the car running down the A and C pillars and between the body and the floor pan. To further simplify construction, the car had external door and boot hinges.
The Mini Cooper and Cooper S – 1961–2000
Issigonis' friend John Cooper, owner of the Cooper Car Company, designer and builder of Formula 1 and rally cars, saw the potential of the Mini. Issigonis was initially reluctant to see the Mini in the role of a performance car - but after John Cooper appealed to BMC management, the two men collaborated to create the Mini Cooper. The Austin Mini Cooper and Morris Mini Cooper debuted in 1961.
The original 848 cc engine from the Morris Mini-Minor was increased to 997 cc, boosting power from 34 bhp to 55 bhp (25 to 41 kW). The car featured a racing-tuned engine, double SU carburettors, close-ratio gearbox and front disc brakes, uncommon at the time in a small car. One thousand units of this iteration were commissioned by management, intended for and designed to meet the homologation rules of Group 2 rally racing. The 997 cc engine was replaced by a shorter stroke 998 cc unit in 1964.
A more powerful Mini Cooper, dubbed the "S", was developed in tandem and released in 1963. Featuring a 1071 cc engine and larger servo-assisted disc brakes, 4,030 Cooper S cars were produced and sold until the model was updated in August 1964. Cooper also produced two models specifically for circuit racing, rated at 970 cc and a 1275 cc, both of which were also offered to the public. The smaller-engine model was not well received, and only 963 were built until the model was discontinued in 1965. The 1275 cc Cooper S models were discontinued in 1971.
The Mini Cooper S earned acclaim with Monte Carlo Rally victories in 1964, 1965, and 1967. Minis were initially placed first, second and third in the 1966 rally as well, but were disqualified after a controversial decision by the French judges. The disqualification related to the use of a variable resistance headlamp dimming circuit in place of a dual-filament lamp. It should be noted that the Citroën DS that was eventually awarded first place had illegal white headlamps but escaped disqualification. The driver of the Citroën, Pauli Toivonen, was reluctant to accept the trophy and vowed that he would never race for Citroën again. BMC probably received more publicity from the disqualification than they would have gained from a victory - but had the Mini not been disqualified, it would have been the only car in history to be placed amongst the Monte Carlo winners for six consecutive years.
In 1971 the Mini Cooper design was licensed in Italy by Innocenti and in 1973 to Spain by Authi (Automoviles de Turismo Hispano-Ingleses), which began to produce the Innocenti Mini Cooper 1300 and the Authi Mini Cooper 1300, respectively.
A new Mini Cooper named the RSP (Rover Special Products) was briefly relaunched in 1990 to 1991, with slightly lower performance than the 1960s Cooper. It proved so popular that the new Cooper-marked Mini went into full production in late 1991. From 1992 Coopers were fitted with a fuel-injected version of the 1275 cc engine, and in 1997 a multi-point fuel injected engine was introduced, along with a front-mounted radiator and various safety improvements.
Issigonis' friend John Cooper, owner of the Cooper Car Company, designer and builder of Formula 1 and rally cars, saw the potential of the Mini. Issigonis was initially reluctant to see the Mini in the role of a performance car - but after John Cooper appealed to BMC management, the two men collaborated to create the Mini Cooper. The Austin Mini Cooper and Morris Mini Cooper debuted in 1961.
The original 848 cc engine from the Morris Mini-Minor was increased to 997 cc, boosting power from 34 bhp to 55 bhp (25 to 41 kW). The car featured a racing-tuned engine, double SU carburettors, close-ratio gearbox and front disc brakes, uncommon at the time in a small car. One thousand units of this iteration were commissioned by management, intended for and designed to meet the homologation rules of Group 2 rally racing. The 997 cc engine was replaced by a shorter stroke 998 cc unit in 1964.
A more powerful Mini Cooper, dubbed the "S", was developed in tandem and released in 1963. Featuring a 1071 cc engine and larger servo-assisted disc brakes, 4,030 Cooper S cars were produced and sold until the model was updated in August 1964. Cooper also produced two models specifically for circuit racing, rated at 970 cc and a 1275 cc, both of which were also offered to the public. The smaller-engine model was not well received, and only 963 were built until the model was discontinued in 1965. The 1275 cc Cooper S models were discontinued in 1971.
The Mini Cooper S earned acclaim with Monte Carlo Rally victories in 1964, 1965, and 1967. Minis were initially placed first, second and third in the 1966 rally as well, but were disqualified after a controversial decision by the French judges. The disqualification related to the use of a variable resistance headlamp dimming circuit in place of a dual-filament lamp. It should be noted that the Citroën DS that was eventually awarded first place had illegal white headlamps but escaped disqualification. The driver of the Citroën, Pauli Toivonen, was reluctant to accept the trophy and vowed that he would never race for Citroën again. BMC probably received more publicity from the disqualification than they would have gained from a victory - but had the Mini not been disqualified, it would have been the only car in history to be placed amongst the Monte Carlo winners for six consecutive years.
In 1971 the Mini Cooper design was licensed in Italy by Innocenti and in 1973 to Spain by Authi (Automoviles de Turismo Hispano-Ingleses), which began to produce the Innocenti Mini Cooper 1300 and the Authi Mini Cooper 1300, respectively.
A new Mini Cooper named the RSP (Rover Special Products) was briefly relaunched in 1990 to 1991, with slightly lower performance than the 1960s Cooper. It proved so popular that the new Cooper-marked Mini went into full production in late 1991. From 1992 Coopers were fitted with a fuel-injected version of the 1275 cc engine, and in 1997 a multi-point fuel injected engine was introduced, along with a front-mounted radiator and various safety improvements.
Monday, December 20, 2010
Ferrari F40, 1987
Ferrari F40, 1987
The Ferrari F40 is a mid-engine, rear-wheel drive, two-door coupé sports car produced by Ferrari from 1987 to 1992 as the successor to the Ferrari 288 GTO. From 1987 to 1989 it held the title as the world's fastest street-legal production car, and during its years of production, was Ferrari's fastest, most powerful, and most expensive car. It was intended that there were to be 400 Ferrari F40 made, all painted red, but a total 1,315 F40s were produced.
The Ferrari F40 was, in the most literal sense, designed as the successor to the company's GTO supercar, but the project's meaning ran deeper. At ninety years old, Enzo Ferrari was keenly aware that his life was coming to an end, and was somewhat disappointed that Ferrari's dominance in international motorsport had faded somewhat over the years. As a result, Enzo wanted a new pet project put into the pipelines, something that could remind the world of the company's capabilities as a manufacturer as well as provide both a competitor to the Porsche 959 and come to be his masterpiece; the company's impending 40th anniversary provided just the right occasion for the car to debut. The plan was simple: create a vehicle that combined the company's best technologies into a no-frills sports car that would come as close as possible to being a full fledged race vehicle while still retaining the necessary equipment to be a street-legal product. It was the last car to be commissioned by Enzo himself before his death.
The Ferrari F40 was designed with aerodynamics in mind, and is very much a creation of its time. For speed the car relied more on its shape than its power. Frontal area was reduced, and airflow greatly smoothed, but stability rather than terminal velocity was a primary concern. So too was cooling as the forced induction engine generated a great deal of heat. In consequence, the car was somewhat like an open-wheel racing car with a body. It had a partial undertray to smooth airflow beneath the radiator, front section, and the cabin, and a second one with diffusers behind the motor, but the engine bay was not sealed. Nonetheless, the Ferrari F40 had an impressively low Cd of 0.34 with lift controlled by its spoilers and wing.
Power came from an enlarged, 2.9 L (2936 cc) version of the GTO's twin IHI turbocharged V8 developing 478 PS (352 kW/471 hp) under 110 kPa (16 psi) of boost. The suspension setup, like the GTO's, remained a double wishbone setup, though many parts were upgraded and settings were changed; the unusually low ground clearance prompted Ferrari to include the ability to raise the vehicle's ground clearance when necessary.
The body was an entirely new design by Pininfarina featuring panels made of kevlar, carbon fiber, and aluminum for strength and low weight, and intense aerodynamic testing was employed. Weight was further minimized through the use of a plastic windshield and windows and no carpets, sound system, or door handles were installed although the cars did have air conditioning. Early cars had fixed windows, although newer windows that could be rolled down were installed into later cars and the Ferrari F40 did without a catalytic converter until 1990 when US regulations made them a requirement for emissions control reasons.
As early as 1984, the Maranello factory had begun development of an evolution model of the 288 GTO intended to compete against the 959 in FIA Group B. However, when the FIA brought an end to the Group B category for the 1986 season, Enzo was left with five 288 GTO Evoluzione development cars, and no series in which to campaign them. Enzo's desire to leave a legacy in his final supercar allowed the Evoluzione program to be further developed to produce a car exclusively for road use.
The factory never intended to race the Ferrari F40, but the car saw competition as early as 1989 when it debuted in the Laguna Seca round of the IMSA, appearing in the GTO category, with a LM evolution model driven by Jean Alesi, finishing third to the two faster spaceframed four wheel drive Audi 90 and beating a host of other factory backed spaceframe specials that dominated the races. Despite lack of factory backing, the car would soon have another successful season there under a host of guest drivers such as Jean-Pierre Jabouille, Jacques Laffite and Hurley Haywood taking a total of three second places and one third.
Though the Ferrari F40 would not return to IMSA for the following season, it would later be a popular choice by privateers to compete in numerous domestic GT series including JGTC. In 1994, the car made its debut in international competitions, with one cars campaigned in the BPR Global GT Series by Strandell, winning at the 4 Hours of Vallelunga. In 1995, the number of F40s climbed to four, developed independently by Pilot-Aldix Racing (F40 LM) and Strandell (F40 GTE, racing under the Ferrari Club Italia banner), winning the 4 Hours of Anderstorp. No longer competitive against the McLaren F1 GTR, the Ferrari F40 returned for another year in 1996, managing to repeat the previous year's Anderstorp win, and from then on it was no longer seen in GT racing.
Performance
The F40's light weight of 1100 kg (2425 lb) and high power output of 478 PS (352 kW/471 hp) at 7000 rpm gave the vehicle tremendous performance potential. Road tests have produced 0-100 km/h (62 mph) times as low as 3.8 seconds (while the track only version came in at 3.2 seconds), with 0-160 km/h (100 mph) in 7.6 seconds and 0-200 km/h (125 mph) in 11 seconds giving the Ferrari F40 a slight advantage in acceleration over the Porsche 959, its primary competitor at the time.
The Ferrari F40 was the first road legal production car to break the 200 mph (322 km/h) barrier. From its introduction in 1987 until 1989, it held the record as the world's fastest production car, with a top speed of 324 km/h (201 mph); the record was broken by the Ruf CTR "Yellowbird"'s 340 km/h (211 mph) top speed. The Ferrari F40 was publicly proven capable of its rated top speed in 1992 through an infamous incident in which a Japanese dealership owner proved the car's potential by filming himself touching its top speed on an expressway only to be arrested after he sold a videotape to an undercover policeman. By that time, he already sold ten thousand videos.
The Ferrari F40 was, in the most literal sense, designed as the successor to the company's GTO supercar, but the project's meaning ran deeper. At ninety years old, Enzo Ferrari was keenly aware that his life was coming to an end, and was somewhat disappointed that Ferrari's dominance in international motorsport had faded somewhat over the years. As a result, Enzo wanted a new pet project put into the pipelines, something that could remind the world of the company's capabilities as a manufacturer as well as provide both a competitor to the Porsche 959 and come to be his masterpiece; the company's impending 40th anniversary provided just the right occasion for the car to debut. The plan was simple: create a vehicle that combined the company's best technologies into a no-frills sports car that would come as close as possible to being a full fledged race vehicle while still retaining the necessary equipment to be a street-legal product. It was the last car to be commissioned by Enzo himself before his death.
The Ferrari F40 was designed with aerodynamics in mind, and is very much a creation of its time. For speed the car relied more on its shape than its power. Frontal area was reduced, and airflow greatly smoothed, but stability rather than terminal velocity was a primary concern. So too was cooling as the forced induction engine generated a great deal of heat. In consequence, the car was somewhat like an open-wheel racing car with a body. It had a partial undertray to smooth airflow beneath the radiator, front section, and the cabin, and a second one with diffusers behind the motor, but the engine bay was not sealed. Nonetheless, the Ferrari F40 had an impressively low Cd of 0.34 with lift controlled by its spoilers and wing.
Power came from an enlarged, 2.9 L (2936 cc) version of the GTO's twin IHI turbocharged V8 developing 478 PS (352 kW/471 hp) under 110 kPa (16 psi) of boost. The suspension setup, like the GTO's, remained a double wishbone setup, though many parts were upgraded and settings were changed; the unusually low ground clearance prompted Ferrari to include the ability to raise the vehicle's ground clearance when necessary.
The body was an entirely new design by Pininfarina featuring panels made of kevlar, carbon fiber, and aluminum for strength and low weight, and intense aerodynamic testing was employed. Weight was further minimized through the use of a plastic windshield and windows and no carpets, sound system, or door handles were installed although the cars did have air conditioning. Early cars had fixed windows, although newer windows that could be rolled down were installed into later cars and the Ferrari F40 did without a catalytic converter until 1990 when US regulations made them a requirement for emissions control reasons.
As early as 1984, the Maranello factory had begun development of an evolution model of the 288 GTO intended to compete against the 959 in FIA Group B. However, when the FIA brought an end to the Group B category for the 1986 season, Enzo was left with five 288 GTO Evoluzione development cars, and no series in which to campaign them. Enzo's desire to leave a legacy in his final supercar allowed the Evoluzione program to be further developed to produce a car exclusively for road use.
The factory never intended to race the Ferrari F40, but the car saw competition as early as 1989 when it debuted in the Laguna Seca round of the IMSA, appearing in the GTO category, with a LM evolution model driven by Jean Alesi, finishing third to the two faster spaceframed four wheel drive Audi 90 and beating a host of other factory backed spaceframe specials that dominated the races. Despite lack of factory backing, the car would soon have another successful season there under a host of guest drivers such as Jean-Pierre Jabouille, Jacques Laffite and Hurley Haywood taking a total of three second places and one third.
Though the Ferrari F40 would not return to IMSA for the following season, it would later be a popular choice by privateers to compete in numerous domestic GT series including JGTC. In 1994, the car made its debut in international competitions, with one cars campaigned in the BPR Global GT Series by Strandell, winning at the 4 Hours of Vallelunga. In 1995, the number of F40s climbed to four, developed independently by Pilot-Aldix Racing (F40 LM) and Strandell (F40 GTE, racing under the Ferrari Club Italia banner), winning the 4 Hours of Anderstorp. No longer competitive against the McLaren F1 GTR, the Ferrari F40 returned for another year in 1996, managing to repeat the previous year's Anderstorp win, and from then on it was no longer seen in GT racing.
Performance
The F40's light weight of 1100 kg (2425 lb) and high power output of 478 PS (352 kW/471 hp) at 7000 rpm gave the vehicle tremendous performance potential. Road tests have produced 0-100 km/h (62 mph) times as low as 3.8 seconds (while the track only version came in at 3.2 seconds), with 0-160 km/h (100 mph) in 7.6 seconds and 0-200 km/h (125 mph) in 11 seconds giving the Ferrari F40 a slight advantage in acceleration over the Porsche 959, its primary competitor at the time.
The Ferrari F40 was the first road legal production car to break the 200 mph (322 km/h) barrier. From its introduction in 1987 until 1989, it held the record as the world's fastest production car, with a top speed of 324 km/h (201 mph); the record was broken by the Ruf CTR "Yellowbird"'s 340 km/h (211 mph) top speed. The Ferrari F40 was publicly proven capable of its rated top speed in 1992 through an infamous incident in which a Japanese dealership owner proved the car's potential by filming himself touching its top speed on an expressway only to be arrested after he sold a videotape to an undercover policeman. By that time, he already sold ten thousand videos.
Bentley S1, 1955
Bentley S1, 1955
The Bentley S1 was a luxury car produced by Bentley Motors Limited from 1955 through 1959. It marked Bentley parent, Rolls-Royce, reducing the differences between their Bentley and Roll-Royce models, with the S1 differing only in its radiator design and badging from the Rolls-Royce Silver Cloud I.
The models shared the 4.9 L (4887 cc/298 in³) straight-6 engine, with this being the last vehicle to use this engine. The bore was 95.25 mm (3.7 in) and the stroke was 114.3 mm (4.5 in). Twin SU carburetors were fitted, with upgraded models from 1957. A 4-speed automatic transmission was standard, with a 4-speed manual available as an option. Two wheelbases were produced: 123 in (3124 mm) and, from 1957, 127 in (3226 mm).
A somewhat sportier coachbuilt-only S1 Continental was introduced six months later.
Production
S1: 3072 (145 with coachbuilt bodies)
S1 long wheelbase: 35 (12 with coachbuilt bodies)
S1 Continental: 431
Bentley R-Type, 1950
Bentley R-Type, 1950
The R Type was the second series of post-war Bentley automobile, replacing the Mark VI. The front of the saloon model was identical to the Mark VI, but many had custom coachwork.
The Continental model was produced specially for continental Europe, with many coachbuilt by H.J. Mulliner. This would be the first appearance of the famed Bentley Continental name.
All R Type models used an iron-block/aluminum-head straight-6 engine fed by twin SU carburettors. The basic engine displaced 4.6 L (4566 cc/278 in³) with a 92.08 mm (3.6 in) bore and 114.3 mm (4.5 in) stroke. The Continental had a larger bore of 94.62 mm (3.7 in) for a total displacement of 4.9 L (4887 cc/298 in³).
Production numbers
Bentley R Type: 2320 (303 with coachbuilt bodies)
Bentley R Continental: 207 (plus one prototype)
The Continental model was produced specially for continental Europe, with many coachbuilt by H.J. Mulliner. This would be the first appearance of the famed Bentley Continental name.
All R Type models used an iron-block/aluminum-head straight-6 engine fed by twin SU carburettors. The basic engine displaced 4.6 L (4566 cc/278 in³) with a 92.08 mm (3.6 in) bore and 114.3 mm (4.5 in) stroke. The Continental had a larger bore of 94.62 mm (3.7 in) for a total displacement of 4.9 L (4887 cc/298 in³).
Production numbers
Bentley R Type: 2320 (303 with coachbuilt bodies)
Tuesday, December 14, 2010
Infiniti I35, 2009
Infiniti I35, 2009
The I30 and I35 were front wheel drive luxury cars from Nissan's Infiniti marque.
The I30 was redesigned for 2000 along with the Maxima. E
In late 2001 the model got its most significant host of upgrades, including minor revisions to the interior, new optional equipment, larger brakes, a re-tuned suspension system, and standard stability control. The car was renamed I35 to reflect an engine-displacement increase from 3.0 to 3.5 L. Nissan's VQ35DE V6 produced 255 hp. Styling was also updated.
Infiniti wanted to convince buyers that the new suspension tuning, enlarged brakes, stability control and 255 horsepower engine had transformed the I into more of a sports sedan and less of sedate entry-level model, but was largely unsuccessful. The model was only available with a 4-speed automatic transmission and front wheel drive, meaning that the ES300 and the base version Acura's then-new TL remained its closest competitors, and models like the 5-Series remained out of its league, as was Acura's Type-S version of the TL.
In September 2004, Nissan announced that I35 production would cease and that model year 2004 would be the last for this vehicle. Infiniti discontinued the I after a short run of 2004 models. The I was succeeded by the new Infiniti G35 (introduced for 2003).
Infiniti G35 Sport Coupe, 2003
Infiniti G35 Sport Coupe, 2003
The Infiniti G35 is a sport luxury car introduced to North America in the 2003 model year. It is known as the 11th generation (V35) Nissan Skyline in Japan, and other names elsewhere in the world. It is available in sedan and coupe. A 6-speed manual transmission became available in 2003 as a 2003.5 model on the sedan (the coupe always had the option). For the 2003-04 model years, the V6 produced 260 horsepower and 260 ft·lbf of torque in the sedan, 280 horsepower and 270 ft·lbf in the coupe. In the 2005 and 2006 model years, those with automatic transmissions (both sedan and coupe) produced 280 horsepower and 270 ft·lbf of torque, while those with manual transmissions produced 298 horsepower and 260 ft·lbf of torque (again, both in sedan and coupe form). The G35 is assembled in Tochigi, Japan, and the first G35 was built on March 12, 2002 as a 2003 model.
The G35 was Motor Trend's Car of the Year for 2003 and has been well-received by both the media and customers as a viable alternative to more expensive luxury cars. The G35 was also nominated for the North American Car of the Year award that year and was on Car and Driver magazine's Ten Best list for 2003 and 2004.
Sporting the ubiquitous (and esteemed) VQ35DE engine, the Infiniti G35 uses a front-midship engine, rear-wheel drive layout (all-wheel drive is available for the G35x sedan) to achieve a 52/48 weight distribution (52% front/48% rear) . Both body styles are available with either a 5-speed automatic or 6-speed manual transmission, although the automatic is the only transmission available for the AWD sedan. The all-wheel drive model is designated the G35x and uses an Aisin-Warner intelligent AWD system that shifts power to the wheels with the most grip.
There are not many differences between the 2003 & 2004 G35 coupes. Both 03 & 04 6MT come standard with Brembo Brakes and the Performance Tire and Wheel Package. For the 2005 models, there were sportier gauges and better interior trim and knobs. Genuine Aluminum trim replaces "tinted" interior trim. Also, rosewood trim is available as a package on the 2005 models. The Brembo Brakes were removed for the 05 & 06 models. Instead, Sport-Tuned Suspension Package was standard on all 6MT models. The 2006 models received minor updates. On the exterior there were new headlights, taillights, spoiler, and front bumper. Bluetooth capability was added to the interior, for hands-free phone use. Rear active steering was also an option for the '06 5AT.
Monday, December 6, 2010
Renault 4 CV Sport, 1954
Renault 4 CV Sport, 1954
The Renault 4CV was an automobile produced by the French manufacturer Renault from 1946 to 1961. An economical "people's car" inspired by the Volkswagen Beetle, it was the first French car to sell over a million.
The 4CV was originally conceived and designed covertly by Renault engineers during the German occupation of France during World War II, when the manufacturer was under strict orders to design and produce only commercial and military vehicles. A design team led by Fernand Picard, Charles-Edmond Serre and Jean-Auguste Riolfo envisioned a small, economical car (similar to the Volkswagen Beetle) suitable for the economically difficult years which would inevitably follow the war. The first prototype was completed in 1942 and two more prototypes were produced in the following three years, with the 4CV ultimately presented to the public and media at the 1946 Paris Motor Show.
On the 4CV's launch, it was nicknamed "La motte de beurre" (the lump of butter) due to the combination of its shape and the fact that many early models were painted with sand yellow-colored German army surplus paint intended for the Afrika Korps. The 4CV was powered by a 748 cc engine producing 17 hp, which was coupled to a three-speed manual transmission. Despite an initial period of uncertainty and poor sales due to the ravaged state of the French economy, the 4CV had sold 37,000 units by mid-1949 and was the most popular car in France. The car remained in production for more than a decade afterwards; it was intended to be replaced by the Renault Dauphine, launched in 1956, but the 4CV in fact remained in production until 1961, only a year earlier than the more expensive Dauphine was discontinued. In event, it was replaced by the Renault 4 which used the same engine and name as the 4CV and sold for a similar price.
1,105,547 cars were produced; the 4CV became the first French car to sell over a million.
The 4CV was easily modified and was used extensively as a racing car, winning both the Le Mans 24 Hours and the Mille Miglia. The first collaboration between the Alpine company and Renault, a partnership which would go on to win the World Rally Championship with the legendary Alpine A-110 in later years, was the Alpine A-106 which was based on the 4CV.
The 4CV was originally conceived and designed covertly by Renault engineers during the German occupation of France during World War II, when the manufacturer was under strict orders to design and produce only commercial and military vehicles. A design team led by Fernand Picard, Charles-Edmond Serre and Jean-Auguste Riolfo envisioned a small, economical car (similar to the Volkswagen Beetle) suitable for the economically difficult years which would inevitably follow the war. The first prototype was completed in 1942 and two more prototypes were produced in the following three years, with the 4CV ultimately presented to the public and media at the 1946 Paris Motor Show.
On the 4CV's launch, it was nicknamed "La motte de beurre" (the lump of butter) due to the combination of its shape and the fact that many early models were painted with sand yellow-colored German army surplus paint intended for the Afrika Korps. The 4CV was powered by a 748 cc engine producing 17 hp, which was coupled to a three-speed manual transmission. Despite an initial period of uncertainty and poor sales due to the ravaged state of the French economy, the 4CV had sold 37,000 units by mid-1949 and was the most popular car in France. The car remained in production for more than a decade afterwards; it was intended to be replaced by the Renault Dauphine, launched in 1956, but the 4CV in fact remained in production until 1961, only a year earlier than the more expensive Dauphine was discontinued. In event, it was replaced by the Renault 4 which used the same engine and name as the 4CV and sold for a similar price.
1,105,547 cars were produced; the 4CV became the first French car to sell over a million.
The 4CV was easily modified and was used extensively as a racing car, winning both the Le Mans 24 Hours and the Mille Miglia. The first collaboration between the Alpine company and Renault, a partnership which would go on to win the World Rally Championship with the legendary Alpine A-110 in later years, was the Alpine A-106 which was based on the 4CV.
Renault Fregate, 1951
Renault Fregate, 1951
The Renault Frégate was a large car produced by the French automaker Renault between 1951 and 1960.
The Frégate was conceived in the years immediately following World War II. Renault, which then had recently been brought under control of the French state, needed a new modern, upmarket model to both improve its image and to cater to the needs of consumers in the quickly recovering economy. Several prototypes were produced before the Frégate design was put into production: initially, the car had a rear-engined layout as in the recently launched Renault 4CV but eventually the manufacturer decided to go with an engine mounted ahead of the driver. The Frégate was unveiled at the 1950 Paris Motor Show but the first model was not delivered until November 1951.
The Frégate was initially available in two trim levels, Affaires and Amiral. Renault addressed the complaints about the lack of power from the 2 litre engine by introducing the new 2141 cc Etendard engine in 1956, which produced 77 hp. A popular estate model badged Domaine was also launched in 1956, along with the new, luxurious Grand Pavois specification. Sales of the Frégate gradually declined throughout the 1950s however and production ceased in 1960. In total, 163,383 Frégates were made in Flins, France.
The Frégate was conceived in the years immediately following World War II. Renault, which then had recently been brought under control of the French state, needed a new modern, upmarket model to both improve its image and to cater to the needs of consumers in the quickly recovering economy. Several prototypes were produced before the Frégate design was put into production: initially, the car had a rear-engined layout as in the recently launched Renault 4CV but eventually the manufacturer decided to go with an engine mounted ahead of the driver. The Frégate was unveiled at the 1950 Paris Motor Show but the first model was not delivered until November 1951.
The Frégate was initially available in two trim levels, Affaires and Amiral. Renault addressed the complaints about the lack of power from the 2 litre engine by introducing the new 2141 cc Etendard engine in 1956, which produced 77 hp. A popular estate model badged Domaine was also launched in 1956, along with the new, luxurious Grand Pavois specification. Sales of the Frégate gradually declined throughout the 1950s however and production ceased in 1960. In total, 163,383 Frégates were made in Flins, France.
Monday, November 29, 2010
VW Passat, 1973
VW Passat, 1973
The original VW Passat was launched in 1973. The body types offered originally were 2- and 4-door sedans and similar looking three- and five-door versions. Externally all four shared a modern fastback style design, styled by the Italian designer Giorgetto Giugiaro). All the versions sharing the same external design was unusual, since two of the models were traditional sedans with a separate trunk. A five-door station wagon was introduced in 1974. Passat was effectively a less expensive version of the Audi 80 (Fox) sedan which had been introduced a year earlier and which had a more conservative body style, so that the Audi and Volkswagen models had distinct body styles and image. In Europe, Passat was equipped with hexagonal or single round or double round headlights depending on specification.
In North America, the car was called the Dasher, and was only available with round DOT-spec lights. The three-door hatchback model was launched in North America in 1975.
VW Passat was one of the most modern European family cars at the time, and was intended as a replacement for the ageing Volkswagen Type 3, and as a contemporary rival for popular Ford Taunus/Cortina) and Opel Ascona/Vauxhall Cavalier. The Passat was Wheels magazine's Car of the Year for 1974 and its sister model Audi 80 was nominated car of the year by the European motor press a year earlier. The platform was named B1.
The Passat used the 4 cylinder OHC 1.3 L, 1.5 L, and 1.6 L petrol engines, also used in the Audi 80—longitudinally mounted with front wheel drive, in Audi tradition, with either a 4-speed manual transmission or 3-speed automatic. It had a MacPherson strut front suspension with a solid axle/coil spring setup in back.
The SOHC 1.5 produced 75 PS (55 kW) and was enlarged to 1.6 L for 1975. The larger engine included tighter emissions controls, so power output dropped to 70 PS (52 kW). Bosch fuel injection on the 1.6 was introduced in 1976 and brought power up to 78 PS (57 kW).
The whole range received a facelift in 1977 (launched 1978 outside Europe), featuring an interior upgrade and subtly revised styling including repositioned indicators and quad (round) headlights on all models. This generation was sold in Brazil well into the 1980s and extensively exported to Iraq, where many are still on the road. It was also assembled in Nigeria.
1979 saw the introduction of the Volkswagen Golf's 1.5 L Diesel engine, which produced just 48 PS (35 kW) in the 1130 kg (2500 lb) car. 0–100 km/h time for the Diesel was 19.4 seconds, 6.2 seconds slower than the gasoline (petrol) engine. Still, all gasoline engines were dropped for North America in 1981 in preparation for the next generation car the next year.
In North America, the car was called the Dasher, and was only available with round DOT-spec lights. The three-door hatchback model was launched in North America in 1975.
VW Passat was one of the most modern European family cars at the time, and was intended as a replacement for the ageing Volkswagen Type 3, and as a contemporary rival for popular Ford Taunus/Cortina) and Opel Ascona/Vauxhall Cavalier. The Passat was Wheels magazine's Car of the Year for 1974 and its sister model Audi 80 was nominated car of the year by the European motor press a year earlier. The platform was named B1.
The Passat used the 4 cylinder OHC 1.3 L, 1.5 L, and 1.6 L petrol engines, also used in the Audi 80—longitudinally mounted with front wheel drive, in Audi tradition, with either a 4-speed manual transmission or 3-speed automatic. It had a MacPherson strut front suspension with a solid axle/coil spring setup in back.
The SOHC 1.5 produced 75 PS (55 kW) and was enlarged to 1.6 L for 1975. The larger engine included tighter emissions controls, so power output dropped to 70 PS (52 kW). Bosch fuel injection on the 1.6 was introduced in 1976 and brought power up to 78 PS (57 kW).
The whole range received a facelift in 1977 (launched 1978 outside Europe), featuring an interior upgrade and subtly revised styling including repositioned indicators and quad (round) headlights on all models. This generation was sold in Brazil well into the 1980s and extensively exported to Iraq, where many are still on the road. It was also assembled in Nigeria.
1979 saw the introduction of the Volkswagen Golf's 1.5 L Diesel engine, which produced just 48 PS (35 kW) in the 1130 kg (2500 lb) car. 0–100 km/h time for the Diesel was 19.4 seconds, 6.2 seconds slower than the gasoline (petrol) engine. Still, all gasoline engines were dropped for North America in 1981 in preparation for the next generation car the next year.
Mercury Cougar Zn, 2001
Mercury Cougar Zn, 2001
The decline of personal luxury cars downsized the Cougar to return as a sports car after 25 years as a personal luxury car. Of the three names that had constituted Ford's personal luxury lineup, Mark, Thunderbird, and Cougar, the Cougar returned first. This time, it is based on the CDW-27 platform, the same platform that serves as the basis for the Ford Mondeo (Ford Contour & Mercury Mystique in the United States and Canada).
This generation of Cougar had a far more contemporary package, with modern DOHC 4-valve engines, a fully independent multilink suspension, and front-wheel drive. This was also the first hatchback Cougar, and the first to have its own body, unshared by any Ford. The body design used a philosophy Ford dubbed "New Edge" design: a combination of organic upper body lines with sharp, concave creases in the lower areas. The Cougar's body, and the New Edge idea in general, was introduced as a concept called the Mercury MC2 in 1997.
The 1999–2002 Cougars were available with two engine options, the 2.0 L Zetec 4-cylinder engine with 130 horsepower, and the 2.5 L Duratec V6 with 170 horsepower. Also, two transaxle options were available: the manual Ford MTX-75 transmission (the only available option with the 4-cylinder Zetec engine), or the automatic Ford CD4E transmission (available in the U.S. with either engine, although the I4/Automatic combo was extremely rare; supposedly only 500 Cougars were built with the I4/Auto combination). "Sport Package" models with the V6 featured 4-wheel vented disc brakes (from the Contour SVT), and had no speed governor installed.
Interestingly, Ford also sold this generation of Cougar in Europe and Australia as the Ford Cougar, but was not a sales success—surprising given that the Mondeo sold well in many countries outside North America.
This generation never sold well. Admittedly, demand for all coupes continued to dwindle, but the sedan versions also languished in North America, suggesting that the Mondeo platform was simply not well suited there—though there is a theory that Ford did not market the Contour and its Mercury Mystique twin properly while the market for the similarly sized BMW 3 Series grew. A high-performance Cougar S (not to be confused with the concept) was discussed in the press, which was essentially a Contour SVT with a Cougar body; however, this version never made it into production. In order to help create excitement for the Cougar, Mercury created several paint and trim packages:
* C2 (2001-2002 model years) available in either French Blue, Silver Frost, or Vibrant White, along with special blue interior accents
* Zn (2000-2001 model years) available with special Zinc Yellow paint, special Visteon hood scoop and spoiler
* XR (2002 model year) available in either Black or Laser Red, with special black and red seats and interior trim
This generation of Cougar had a far more contemporary package, with modern DOHC 4-valve engines, a fully independent multilink suspension, and front-wheel drive. This was also the first hatchback Cougar, and the first to have its own body, unshared by any Ford. The body design used a philosophy Ford dubbed "New Edge" design: a combination of organic upper body lines with sharp, concave creases in the lower areas. The Cougar's body, and the New Edge idea in general, was introduced as a concept called the Mercury MC2 in 1997.
The 1999–2002 Cougars were available with two engine options, the 2.0 L Zetec 4-cylinder engine with 130 horsepower, and the 2.5 L Duratec V6 with 170 horsepower. Also, two transaxle options were available: the manual Ford MTX-75 transmission (the only available option with the 4-cylinder Zetec engine), or the automatic Ford CD4E transmission (available in the U.S. with either engine, although the I4/Automatic combo was extremely rare; supposedly only 500 Cougars were built with the I4/Auto combination). "Sport Package" models with the V6 featured 4-wheel vented disc brakes (from the Contour SVT), and had no speed governor installed.
Interestingly, Ford also sold this generation of Cougar in Europe and Australia as the Ford Cougar, but was not a sales success—surprising given that the Mondeo sold well in many countries outside North America.
This generation never sold well. Admittedly, demand for all coupes continued to dwindle, but the sedan versions also languished in North America, suggesting that the Mondeo platform was simply not well suited there—though there is a theory that Ford did not market the Contour and its Mercury Mystique twin properly while the market for the similarly sized BMW 3 Series grew. A high-performance Cougar S (not to be confused with the concept) was discussed in the press, which was essentially a Contour SVT with a Cougar body; however, this version never made it into production. In order to help create excitement for the Cougar, Mercury created several paint and trim packages:
* C2 (2001-2002 model years) available in either French Blue, Silver Frost, or Vibrant White, along with special blue interior accents
* Zn (2000-2001 model years) available with special Zinc Yellow paint, special Visteon hood scoop and spoiler
* XR (2002 model year) available in either Black or Laser Red, with special black and red seats and interior trim
Mercury Cougar C2, 2001
Mercury Cougar C2, 2001
The decline of personal luxury cars downsized the Cougar to return as a sports car after 25 years as a personal luxury car. Of the three names that had constituted Ford's personal luxury lineup, Mark, Thunderbird, and Cougar, the Cougar returned first. This time, it is based on the CDW-27 platform, the same platform that serves as the basis for the Ford Mondeo (Ford Contour & Mercury Mystique in the United States and Canada).
This generation of Cougar had a far more contemporary package, with modern DOHC 4-valve engines, a fully independent multilink suspension, and front-wheel drive. This was also the first hatchback Cougar, and the first to have its own body, unshared by any Ford. The body design used a philosophy Ford dubbed "New Edge" design: a combination of organic upper body lines with sharp, concave creases in the lower areas. The Cougar's body, and the New Edge idea in general, was introduced as a concept called the Mercury MC2 in 1997.
The 1999–2002 Cougars were available with two engine options, the 2.0 L Zetec 4-cylinder engine with 130 horsepower, and the 2.5 L Duratec V6 with 170 horsepower. Also, two transaxle options were available: the manual Ford MTX-75 transmission (the only available option with the 4-cylinder Zetec engine), or the automatic Ford CD4E transmission (available in the U.S. with either engine, although the I4/Automatic combo was extremely rare; supposedly only 500 Cougars were built with the I4/Auto combination). "Sport Package" models with the V6 featured 4-wheel vented disc brakes (from the Contour SVT), and had no speed governor installed.
Ford also prepared two high performance concept-only versions dubbed the "Eliminator", which was a supercharged version built with aftermarket available parts, and the "Cougar S", which featured new body work, all-wheel drive and a 3.0 L Duratec engine.
Interestingly, Ford also sold this generation of Cougar in Europe and Australia as the Ford Cougar, but was not a sales success—surprising given that the Mondeo sold well in many countries outside North America.
This generation never sold well. Admittedly, demand for all coupes continued to dwindle, but the sedan versions also languished in North America, suggesting that the Mondeo platform was simply not well suited there—though there is a theory that Ford did not market the Contour and its Mercury Mystique twin properly while the market for the similarly sized BMW 3 Series grew. A high-performance Cougar S (not to be confused with the concept) was discussed in the press, which was essentially a Contour SVT with a Cougar body; however, this version never made it into production. In order to help create excitement for the Cougar, Mercury created several paint and trim packages:
This generation of Cougar had a far more contemporary package, with modern DOHC 4-valve engines, a fully independent multilink suspension, and front-wheel drive. This was also the first hatchback Cougar, and the first to have its own body, unshared by any Ford. The body design used a philosophy Ford dubbed "New Edge" design: a combination of organic upper body lines with sharp, concave creases in the lower areas. The Cougar's body, and the New Edge idea in general, was introduced as a concept called the Mercury MC2 in 1997.
The 1999–2002 Cougars were available with two engine options, the 2.0 L Zetec 4-cylinder engine with 130 horsepower, and the 2.5 L Duratec V6 with 170 horsepower. Also, two transaxle options were available: the manual Ford MTX-75 transmission (the only available option with the 4-cylinder Zetec engine), or the automatic Ford CD4E transmission (available in the U.S. with either engine, although the I4/Automatic combo was extremely rare; supposedly only 500 Cougars were built with the I4/Auto combination). "Sport Package" models with the V6 featured 4-wheel vented disc brakes (from the Contour SVT), and had no speed governor installed.
Ford also prepared two high performance concept-only versions dubbed the "Eliminator", which was a supercharged version built with aftermarket available parts, and the "Cougar S", which featured new body work, all-wheel drive and a 3.0 L Duratec engine.
Interestingly, Ford also sold this generation of Cougar in Europe and Australia as the Ford Cougar, but was not a sales success—surprising given that the Mondeo sold well in many countries outside North America.
This generation never sold well. Admittedly, demand for all coupes continued to dwindle, but the sedan versions also languished in North America, suggesting that the Mondeo platform was simply not well suited there—though there is a theory that Ford did not market the Contour and its Mercury Mystique twin properly while the market for the similarly sized BMW 3 Series grew. A high-performance Cougar S (not to be confused with the concept) was discussed in the press, which was essentially a Contour SVT with a Cougar body; however, this version never made it into production. In order to help create excitement for the Cougar, Mercury created several paint and trim packages:
- C2 (2001-2002 model years) available in either French Blue, Silver Frost, or Vibrant White, along with special blue interior accents
- Zn (2000-2001 model years) available with special Zinc Yellow paint, special Visteon hood scoop and spoiler
- XR (2002 model year) available in either Black or Laser Red, with special black and red seats and interior trim
Tuesday, November 23, 2010
Dodge 2 dr. Sedan (hotrod), 1933
Dodge 2 door sedan (hotrod), 1933
1933 Dodge 2 door sedan, hotrod. Engine 350
Tuesday, November 16, 2010
Porsche 901, 1963
Porsche 901, 1963
Porsche 901 was the name originally intended for the Porsche 911. By the early 1960s, Porsche project design numbers had reached into the 800s. For instance, Porsche's 1962 F1 model was called Porsche 804.
At the Internationale Automobil-Ausstellung (Frankfurt Motor Show) in Frankfurt in September 1963, Porsche presented its successor to the Porsche 356 as the Porsche 901. It took several more months until the cars was sold to customers. In late 1964, after having sold about 82 cars, the Porsche 901 was presented at the Paris Auto Salon. There, French car maker Peugeot objected to Porsche using any three digit number where the middle number was 0, owning the naming rights and having already sold many models with that scheme.
Porsche simply replaced the middle 0 with a 1, and called the car Porsche 911.
Other Porsche models were affected, which were primarily intended for racing but also sold as road legal cars. Here, Porsche kept the internal part number of 90x, but sold the car with a name, like: Porsche 904 as Carrera GTS, Porsche 906 as Carrera 6.
Porsche enthusiasts continue to refer to these cars by their three digit design numbers.
Later, Porsche introduced pure racing cars which were not sold for road use, so not competing with any road-going Peugeot. These carried the design numbers: Porsche 907, Porsche 908, Porsche 909.
Nearly three decades later, a 905 was entered in the 1991 24 Hours of Le Mans, but not by Porsche (which then had won over a dozen times already), but by Peugeot: The Peugeot 905 won twice, in 1992 and in 1993. A Peugeot 908 Diesel was entered in the 2008 event, and won in 2009. Peugeot never used the number 901, though.
The 901 number is used among Porsche enthusiasts as shorthand to identify the aluminum 5-Speed transmission used in early 911s, the part number for these transmissions used an 11 digit code that began with 901 as did many other parts on the early cars. Later 911s from 1969 used a different magnesium case and a part number beginning with 911.
Pontiac GTO, 1967
Pontiac GTO, 1967
The Pontiac GTO was an automobile built by Pontiac from 1964 to 1974, and by General Motors Holden in Australia from 2003 to 2006. It is often considered the first true muscle car. From 1964 until 1973.5, it was closely related to the Pontiac Tempest, but for its final year it was based on the Pontiac Ventura. The 21st century GTO is essentially a left hand drive Holden Monaro, itself a coupe variant of the Holden Commodore.
Origins
The GTO was the brainchild of Pontiac engineer Russell Gee, an engine specialist, and Pontiac chief engineer John De Lorean. Shane Wiser was the first to think of the idea of the GTO. In early 1963, General Motors management issued an edict banning divisions from involvement in auto racing. At the time, Pontiac's advertising and marketing approach was heavily based on performance, and racing was an important component of that strategy. Jim Wangers proposed a way to retain the performance image that the division had cultivated with a new focus on street performance. It involved transforming the upcoming redesigned Tempest (which was set to revert to a conventional front-engine, front transmission, rear-wheel drive configuration) into a "Super Tempest" with the larger 389 in³ (6.5 L) Pontiac V8 engine from the full-sized Pontiac Catalina and Bonneville in place of the standard 326 in³ (5.3 L) Tempest V8. By promoting the big-engine Tempest as a special high-performance model, they could appeal to the speed-minded youth market (which had also been recognized by Ford Motor Company's Lee Iacocca, who was at that time preparing the Ford Mustang).
The name, which was DeLorean's idea, was inspired by the Ferrari 250 GTO, the highly successful race car. It is an acronym for Gran Turismo Omologato, Italian for homologated for racing in the GT class. The name drew protest from purists, who considered it close to sacrilege.
The GTO was technically a violation of GM policy limiting the A-body intermediate line to a maximum engine displacement of 330 in³ (5.4 L). Since the GTO was an option package and not standard equipment, it could be considered to fall into a loophole in the policy. Pontiac General Manager Elliot "Pete" Estes approved the new model, although sales manager Frank Bridge, who did not believe it would find a market, insisted on limiting initial production to no more than 5,000 cars. Had the model been a failure, Estes likely would have been reprimanded. As it turned out, it was a great success.
First generation
1964
The first Pontiac GTO was an option package for the Pontiac LeMans, available with the two-door sedan, hardtop coupe, and convertible body styles. For US$ 296, it included the 389 in³ V8 (rated at 325 hp (242 kW) at 4800 rpm) with a single Carter AFB four-barrel carburetor and dual exhaust, chromed valve covers and air cleaner, 7 blade clutch fan, a floor-shifted three-speed manual transmission with Hurst shifter, stiffer springs, larger diameter front sway bar, wider wheels with 7.50 x 14 redline tires, hood scoops, and GTO badges. Optional equipment included a four-speed manual transmission, two-speed automatic transmission, a more powerful "Tri-Power" carburation rated at 348 hp (260 kW), metallic drum brake linings, limited slip differential, heavy-duty cooling, ride and handling package, and the usual array of power and convenience accessories. With every available option, the GTO cost about US$ 4,500 and weighed around 3,500 pounds (1,600 kg).
Most contemporary road tests used the more powerful Tri-Power engine and four-speed. Car Life clocked a GTO so equipped at 0-60 miles per hour (0-97 km/h) in 6.6 seconds, through the standing quarter mile in 14.8 seconds with a top speed of 99 miles per hour (158 km/h). Like most testers, they criticized the slow steering, particularly without power steering, and inadequate drum brakes, which were identical to those of the normal Tempest. Car and Driver incited controversy when it printed that a GTO that had supposedly been tuned with the "Bobcat" kit offered by Royal Pontiac of Royal Oak, Michigan, was clocked at a quarter mile time of 12.8 seconds and a top speed of 112 mph (179 km/h) on racing slicks. Later reports strongly suggest that the Car and Driver GTOs were equipped with a 421 in³ (6.9 L) engine that was optional in full-sized Pontiacs. Since the two engines were difficult to distinguish externally, the subterfuge was not immediately obvious. Frank Bridge's sales forecast proved inaccurate: the GTO package had sold 10,000 units before the beginning of the 1964 calendar year, and total sales were 32,450.
Bobcat
Throughout the 1960s, Royal Pontiac, a Pontiac car dealer in Royal Oak, Michigan, offered a special tune-up package for Pontiac 389 engines. Many were fitted to GTOs, and the components and instructions could be purchased by mail as well as installed by the dealer. The name "Bobcat" came from the improvised badges created for the modified cars, combining letters from the "Bonneville" and "Catalina" nameplates. Many of the Pontiacs made available for magazine testing were equipped with the Bobcat kit. The GTO Bobcat accelerated 0-60 in 4.6 seconds (this 0-60 time is now equalled by the factory 2005-06 GTO with automatic transmission and no modification).
The precise components of the kit varied but generally included pieces to modify the spark advance of the distributor, limiting spark advance to 34-36° at no more than 3,000 rpm (advancing the timing at high rpm for increased power), a thinner head gasket to raise compression to about 11.23:1, a gasket to block the heat riser of the carburetor (keeping it cooler), larger carburetor jets, high-capacity oil pump, and fiberglass shims with lock nuts to hold the hydraulic valve lifters at their maximum point of adjustment, allowing the engine to rev higher without "floating" the valves. Properly installed, the kit could add between 30 and 50 horsepower (20-40 kW), although it required high-octane superpremium gasoline of over 100 octane to avoid spark knock with the higher compression and advanced timing.
1965
The Tempest line, including the GTO, was restyled for the 1965 model year, adding 3.1 inches (7.9 cm) to the overall length while retaining the same wheelbase and interior dimensions. It sported Pontiac's characteristic vertically stacked quad headlights. Overall weight increased about 100 pounds (45 kg). Brake lining area increased nearly 15%. The dashboard design was improved, and an optional rally gauge cluster added a more legible tachometer and oil pressure gauge.
The 389 engine had revised cylinder heads with re-cored intake passages, improving breathing. Rated power increased to 335 hp (250 kW) @ 5,000 rpm for the base 4—barrel engine; the Tri-Power was rated 360 hp ((268 kW) @ 5,200 rpm. The Tri-Power engine had slightly less torque than the base engine, 424 ft·lbf (574 N·m) @ 3,600 rpm versus 431 ft·lbf (584 N·m) @ 3,200 rpm. Transmission and axle ratio choices remained the same.
The restyled GTO had a new simulated hood scoop. A rare, dealer-installed option was a metal underhood pan and gaskets that allowed the scoop to be opened, transforming a cosmetic device into a functional cold air intake. The scoop was low enough that its effectiveness was questionable (it was unlikely to pick up anything but boundary layer air), but it at least admitted cooler, denser air, and allowed more of the engine's formidable roar to escape.
Car Life tested a 1965 GTO with Tri-Power and what they considered the most desirable options (close-ratio four-speed manual transmission, power steering, metallic brakes, rally wheels, 4.11 limited-slip differential, and Rally Gauge Cluster), with a total sticker price of US$3,643.79. With two testers and equipment aboard, they recorded 0-60 miles per hour (0-97 km/h) in 5.8 seconds, the standing quarter mile in 14.5 seconds with a trap speed of 100 miles per hour (160 km/h), and an observed top speed of 114 miles per hour (182.4 km/h) at the engine's 6,000 rpm redline. Even Motor Trend's four-barrel test car, a heavier convertible handicapped by the two-speed automatic transmission and the lack of a limited slip differential, ran 0-60 mph in 7 seconds and through the quarter mile in 16.1 seconds at 89 miles per hour (142.4 km/h).
Pontiac's intermediate line was restyled again for 1966,
gaining more curvaceous styling with kicked-up rear fender lines for a "Coke-bottle" look, and a slightly "tunneled" backlight. Overall length grew only fractionally, to 206.4 inches (524 cm), still on a 115 inch (292 cm) wheelbase, while width expanded to 74.4 inches (189 cm). Rear track increased one inch (2.5 cm). Overall weight remained about the same. The GTO became a separate model series, rather than an option package, with unique grille and tail lights, available as a pillared sports coupe, a hardtop sans pillars, or a convertible. Also an automotive industry first, plastic front grilles replaced the pot metal and aluminum versions seen on earlier years. New Strato bucket seats were introduced with higher and thinner seat backs and contoured cushions for added comfort and adjustable headrests were introduced as a new option. The instrument panel was redesigned and more integrated than in previous years with the ignition switch moved from the far left of the dash to the right of the steering wheel. Four pod instruments continued, and the GTO's dash was highlighted by walnut veneer trim. The 1966 model year is viewed by many as the most iconic of all GTOs because of its independent model status and because it was the last year Pontiac offered the 389 Tri Power engine configuration.
Engine choices remained the same as the previous year. A new rare engine option was offered: the XS engine option consisted of a factory Ram Air set up with a new 744 high lift cam. Approximately 35 factory installed Ram Air packages are believed to have been built, though 300 dealership installed Ram Air packages are estimated to have been ordered. On paper, the package was said to produce the same 360 hp as the non-Ram Air, Tri Power car, though these figures are believed to have been grossly underestimated in order to get past GM mandates.
Sales increased to 96,946, the highest production figure for all GTO years. Although Pontiac had strenuously promoted the GTO in advertising as the "GTO Tiger," it had become known in the youth market as the "Goat." Pontiac management attempted to make use of the new nickname in advertising but were vetoed by upper management, which was dismayed by its irreverent tone.
1967
Styling remained essentially unchanged for 1967, but the GTO saw several significant mechanical changes.
A corporate policy decision banned multiple carburetors for all cars except the Chevrolet Corvette, so the Tri-Power engine was cancelled and replaced with new quadrajet four-barrel carburetor. Chevrolet was able to keep the tri-power set up to help with their image; the GTO was really becoming a serious competition problem for them. To compensate, the 389 engine received a slightly wider cylinder bore (4.12 inches, 104.7 mm) for a total displacement of 400 in³ (6.6 L). Torque increased slightly, from 431 to 441 ft-lbf (584 to 598 N·m) for the base engine, from 424 to 438 ft-lbf (575 to 594 N·m) for the optional engine but power remained the same. Testers found little performance difference, although the distinctive sound and fury of the Tri-Power was missed.
Two new engines were offered. The first was an economy engine, also 400 in³ but with a two-barrel carburetor, 8.6:1 compression, and a rating of 265 hp (198 kW) and 397 ft-lbf (538 N·m) of torque. The package, which included a functional hood scoop (much like the previous dealer-installed set-up), featured stiffer valve springs and a longer-duration camshaft. Rated power and torque were unchanged, although the engine was certainly stronger than that of the standard 360 hp (268 kW) GTO. It was available only with 3.90:1 or 4.33:1 differential gearing, and its "hotter" camshaft left it with a notably lumpier idle and less cooperative part-throttle response.
Emission controls, including an air injector system, were fitted in GTOs sold in California only.
The two-speed automatic was replaced with the three-speed Turbo-Hydramatic TH400, which was available with any engine. When the Strato bucket seats and console were ordered, the TH was further enhanced by the use of Hurst's Dual-Gate shifter, which permitted automatic shifting in "Drive' or manual selection through the gears. It was generally considered an equal match for the four-speed in most performance aspects. Meanwhile, the Tempest's inadequate drum brakes could be replaced by optional disc brakes on the front wheels (for US$104.79, including power boost), a vast improvement in both braking performance and fade resistance.
Subscribe to:
Posts (Atom)
